R2 Modular Motorcycle Helmet - ECE

A helmet only protects you properly when it fits. Take two minutes to measure before you order.

How to measure your head

Use a soft measuring tape. No tape? Use a piece of string, then measure the string with a ruler.
Wrap it around the widest part of your head, about one inch above your eyebrows and just above your ears.
Keep the tape level all the way round and comfortably snug.
Measure two or three times and use the largest reading.

Match your measurement to the chart

Sizing differs between helmet models, so always use the size chart shown on the product page of the helmet you want. Don't assume your size in one helmet is your size in another.

How a helmet should feel

Snug all the way around, with the cheek pads touching your cheeks.
No pressure points or hot spots on your forehead.
With the strap fastened, the helmet should not roll forward off your head or twist freely side to side.
New helmets loosen slightly as the padding beds in, so a firm fit is normal.

Between two sizes?

Email contact@ridercape.com with your measurement and the helmet you're looking at, and we'll help you choose.

Gloves, jackets and boots

For riding gear, use the size information on each product page and compare it with your own measurements.

If the fit isn't right when it arrives, see our Refund Policy.

Built for your next ride

Description

At 1.5kg (3.3 lbs), the R2 is a light DOT and ECE certified motorcycle helmet that works for commuting, touring and weekend rides alike. It combines an aerodynamic ABS shell with a dual visor system and a washable liner, so it covers the basics without adding weight to your neck.

Key features

Low weight: 1.5kg (3.3 lbs) reduces neck strain on longer rides.
ABS shell with EPS liner: high-strength shell and impact-absorbing foam that meet DOT and ECE safety standards.
Dual visor system: clear outer visor plus a built-in sun visor for glare protection and visibility in changing weather.
Three-point airflow: chin, top and rear vents move air through and carry heat away.
Removable, washable liner: skin-friendly padding you can take out and clean.
Visor options: clear or tinted visors to suit your style and conditions.

Specifications

Weight: 1.5kg (3.3 lbs)
Certification: DOT and ECE approved
Shell material: ABS with EPS impact absorption
Liner: removable and washable

Sizing

Available in XS, S, M, L and XL; see the size chart below. To measure, wrap a flexible tape around your head just above your eyebrows and ears. If you fall between sizes, take the smaller one for a snug, secure fit.

Finishes: Matte Black, Gloss Black, Matte Silver, Gloss Silver, Gold Phoenix, Black Skull Rider, White Skull Rider, Red HexaTech, Black & Green, Black & Blue, Black & Pink Blaze and Black & Red Inferno.

Size	Head Circumference (cm)	Head Circumference (inches)
XS	53 – 54 cm	20.9 – 21.3 in
S	55 – 56 cm	21.7 – 22.0 in
M	57 – 58 cm	22.4 – 22.8 in
L	59 – 60 cm	23.2 – 23.6 in
XL	61 – 62 cm	24.0 – 24.4 in

Find your fit.

A great ride starts with the right fit. Measure your head before you pick a size.

Wrap a soft measuring tape around your head, just above your eyebrows and ears.

Keep the tape level and comfortably snug, then read your head circumference.

Match your measurement to the size chart for this helmet in the description above.

Between two sizes? A helmet should feel snug without pressure points. Not sure? Email contact@ridercape.com before you order.

Frequently asked questions

How do I choose the right helmet size?

Measure your head circumference just above the eyebrows and ears, then compare it with the size chart in the product description. Sizing can differ between helmet models, so check the chart for this one.

Is this helmet safety certified?

Where a helmet carries a certification such as DOT or ECE, it is listed in the product description. If you can't find it there, email us before ordering and we'll confirm.

How much is shipping?

Shipping is calculated at checkout and shown before you pay, so there are no surprises.

Which options come with my order?

You receive exactly the variant you select above — colour, size and any other option shown. Double-check your selection before adding to cart.

How do I contact support?

Email contact@ridercape.com with your question or order number and we'll get back to you.